How to Maintain a Speed Sensor on the Front Wheel on 2000 Jeep Grand Cherokee?

To start, raise and support the car, then unbolt the sensor from the steering knuckle and remove it. After that, take off the wire from the brackets around the steering knuckle and separate it from the harness before removing the sensor and wire. To install the sensor, put it back on the steering knuckle and put Mopar Lock N' Seal or Loctite 242 on the sensor mounting bolt, replacing the original bolt if it's worn out. Secure the braid and sensor mounting bolt using a torque setting of 12 - 14 Nm (106 - 124 inch lbs.) with grommets that go between the steering brackets and hold the sensor wire securely in place. Also, be sure the sensor wire has a clear route, away from all the vehicle parts and not coiled or curled and then remove the support before lowering the car.

OEM 2000 Jeep Grand Cherokee Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Speed Sensors found

View related parts
2000 Jeep Grand Cherokee ABS Sensor, Front Driver Side Part Number: 56041317AC
$80.84 MSRP: $123.00
You Save: $42.16 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Front Left; Anti-Lock Braking System Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 48.8 x 1.5 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041317AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee ABS Sensor Part Number: 56041509AA
$52.72 MSRP: $116.00
You Save: $63.28 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; Anti-Lock Braking System Speed Sensor; ABS Wheel Speed Sensor; Rear Speed Sensor; Front Speed Sensor; Sensor Wheel Speed
- Item Weight: 0.70 Pounds
- Item Dimensions: 54.0 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041509AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee ABS Sensor, Front Passenger Side Part Number: 56041316AC
$97.98 MSRP: $148.00
You Save: $50.02 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; ABS Wheel Speed Sensor, Front Right; Anti-Lock Braking System Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.9 x 3.6 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041316AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee ABS Sensor Part Number: 56041308AA
$120.42 MSRP: $182.00
You Save: $61.58 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Wheel Speed; Anti-Lock Braking System Speed Sensor; ABS Wheel Speed Sensor; Rear Speed Sensor; Front Speed Sensor; Sensor Wheel Speed
- Item Weight: 1.10 Pounds
- Item Dimensions: 54.3 x 1.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041308AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee Crankshaft Position Sensor Part Number: 56027868AD
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Vehicle Speed Sensor
- Replaces: 4897321AA, 56027868AC, 4897189AA, 4897321AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027868AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Orvis, Special Edition, Sport, TSi | 4.0L V6, 6 Cyl 4.0 L GAS

2000 Jeep Grand Cherokee Speed Sensor Parts and Q&A

Q: How to Maintain a Speed Sensor on the Front Wheel on 2000 Jeep Grand Cherokee?
A: To start, raise and support the car, then unbolt the sensor from the steering knuckle and remove it. After that, take off the wire from the brackets around the steering knuckle and separate it from the harness before removing the sensor and wire. To install the sensor, put it back on the steering knuckle and put Mopar Lock N' Seal or Loctite 242 on the sensor mounting bolt, replacing the original bolt if it's worn out. Secure the braid and sensor mounting bolt using a torque setting of 12 - 14 Nm (106 - 124 inch lbs.) with grommets that go between the steering brackets and hold the sensor wire securely in place. Also, be sure the sensor wire has a clear route, away from all the vehicle parts and not coiled or curled and then remove the support before lowering the car.