How to Replace and Install an Ignition Coil on 2000 Jeep Wrangler?

You need to replace the ignition coil with an epoxy filled type, if that is what was originally in the car. It is attached to a bracket behind and to the side of the distributor on the engine. To start, unplug the ignition coil secondary cable and the engine harness connector from the ignition coil. After that, unscrew the mounting bolts, as some coils may have nuts at the back of the bracket. The installation of the ignition coil after removal means placing it on the bracket, tightening any nuts used to 11 Nm (100 in. lbs.) and the bolts to 5 Nm (50 in. lbs.), if present. Then, plug the engine harness connector and the ignition coil cable once again into the ignition coil.

OEM 2000 Jeep Wrangler Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2000 Jeep Wrangler Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00
You Save: $40.35 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028172AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Wrangler Ignition Coil Part Number: 56041476AB
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56041476AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 5.3 x 6.2 x 29.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041476AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS

2000 Jeep Wrangler Ignition Coil Parts and Q&A

Q: How to Replace and Install an Ignition Coil on 2000 Jeep Wrangler?
A: You need to replace the ignition coil with an epoxy filled type, if that is what was originally in the car. It is attached to a bracket behind and to the side of the distributor on the engine. To start, unplug the ignition coil secondary cable and the engine harness connector from the ignition coil. After that, unscrew the mounting bolts, as some coils may have nuts at the back of the bracket. The installation of the ignition coil after removal means placing it on the bracket, tightening any nuts used to 11 Nm (100 in. lbs.) and the bolts to 5 Nm (50 in. lbs.), if present. Then, plug the engine harness connector and the ignition coil cable once again into the ignition coil.