How to Replace and Install an Ignition Coil on 2001 Jeep Wrangler?

The ignition coil, an epoxy-filled type, must be replaced with the same type. To remove it, disconnect the secondary cable and engine harness, then remove the mounting bolts. Reinstall by securing it with bolts to specified torque and reconnecting the harness and cable.

OEM 2001 Jeep Wrangler Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2001 Jeep Wrangler Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00
You Save: $40.35 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028172AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- SE, Sahara, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Jeep Wrangler Ignition Coil Part Number: 56041476AB
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56041476AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 5.3 x 6.2 x 29.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041476AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS

2001 Jeep Wrangler Ignition Coil Parts and Q&A

Q: How to Replace and Install an Ignition Coil on 2001 Jeep Wrangler?
A: The ignition coil, an epoxy-filled type, must be replaced with the same type. To remove it, disconnect the secondary cable and engine harness, then remove the mounting bolts. Reinstall by securing it with bolts to specified torque and reconnecting the harness and cable.