How to Service and Repair a Brake Disc on 2001 Dodge Dakota?

First, raise your vehicle and support it and next remove the wheel and tire assembly to start servicing the brake disc. Once your vehicle is on the floor stand, pull off the brake caliper, together with the retainers on the wheel studs, to remove the disc. First, you should put the disc hub and retainers on, then come the brake caliper. Then, fit the wheel and tire assembly in place, take off the support and slowly bring the vehicle down. Lastly, press the brake pedal a few times to allow the rims to press the brake pads firmly.

OEM 2001 Dodge Dakota Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Disc found

View related parts
2001 Dodge Dakota Rotor, Front Part Number: 52009208AD
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 52009208, 52009208AE
- Item Weight: 17.40 Pounds
- Item Dimensions: 11.8 x 11.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52009208AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Dakota Submodels:
- Base, R/T, SLT, SXT, Sport | 2.5L L4, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Dakota Brake Disc Parts and Q&A

Q: How to Service and Repair a Brake Disc on 2001 Dodge Dakota?
A: First, raise your vehicle and support it and next remove the wheel and tire assembly to start servicing the brake disc. Once your vehicle is on the floor stand, pull off the brake caliper, together with the retainers on the wheel studs, to remove the disc. First, you should put the disc hub and retainers on, then come the brake caliper. Then, fit the wheel and tire assembly in place, take off the support and slowly bring the vehicle down. Lastly, press the brake pedal a few times to allow the rims to press the brake pads firmly.