JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Dakota MAP Sensor
Manifold Air Pressure Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 MAP Sensors found
2000 Dodge Dakota M.A.P. Sensor Part Number: 56041018
$169.95 MSRP: $253.00You Save: $83.05 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota M.A.P. Sensor Part Number: 56029405
Product Specifications- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029405
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota MAP Sensor Parts and Q&A
- Q: How to Remove and Install a MAP Sensor on the Throttle Body on 2000 Dodge Dakota?A: On one side of the throttle body, you'll find the MAP sensor connected with a long rubber fitting that looks like the letter L. Remove the valve housing from the throttle body, once you have done that, take off the electrical wire connector at the MAP sensor. The next step is to remove the two mounting screws (bolts) connecting the MAP sensor, whereas at the same time, take off the rubber L-shape from both the throttle body and the sensor. For installation, needle the L-shaped rubber fitting into the MAP sensor, fit the sensor over the throttle body while keeping the fitting above the throttle body vacuum nipple and use the mounting bolts (screws) to secure the MAP sensor, applying 3 Nm (25 in. lbs.) of torque. Then, plug the sensor's electrical connector back in and put the air duct back at the throttle body.
Related 2000 Dodge Dakota Parts
2000 Dodge Dakota Ignition Coil
2000 Dodge Dakota Camshaft Position Sensor
2000 Dodge Dakota Coolant Temperature Sensor
2000 Dodge Dakota Distributor
2000 Dodge Dakota Distributor Cap
2000 Dodge Dakota Neutral Safety Switch
2000 Dodge Dakota Oxygen Sensor
2000 Dodge Dakota Throttle Position Sensor
2000 Dodge Dakota Distributor Rotor
2000 Dodge Dakota Engine Control Module
2000 Dodge Dakota Intake Manifold Temperature Sensor
2000 Dodge Dakota Wiper Switch