How Can Brake Drum Machining on a Drum Lathe Avoid Taper and Surface Variation on 2001 Jeep Wrangler?

Brake drums may be turned in a lathe, and the initial cuts are restricted to 0.12 - 0.20 mm to avoid taper, and the final cuts to 0.025 to 0.038 mm to a smooth finish. Firmly screw the drum and apply a damper strap to eliminate vibration. Change the drum when machining is more than the maximum diameter.

OEM 2001 Jeep Wrangler Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2001 Jeep Wrangler Drum, Rear Part Number: 52005350AC
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Brake Drum
- Position: Rear
- Replaces: 52005350
- Item Weight: 14.90 Pounds
- Item Dimensions: 12.5 x 11.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005350AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS

2001 Jeep Wrangler Brake Drum Parts and Q&A

Q: How Can Brake Drum Machining on a Drum Lathe Avoid Taper and Surface Variation on 2001 Jeep Wrangler?
A: Brake drums may be turned in a lathe, and the initial cuts are restricted to 0.12 - 0.20 mm to avoid taper, and the final cuts to 0.025 to 0.038 mm to a smooth finish. Firmly screw the drum and apply a damper strap to eliminate vibration. Change the drum when machining is more than the maximum diameter.