How to Remove and Install the Intake Manifold Temperature Sensor on 2002 Dodge Ram 1500?

On the left side of the intake manifold plenum, you'll find the intake manifold temperature (IMT) sensor. Remove the electrical connection from the IMT sensor and then clean any debris from around the sensor site. After that, gently pull the small release tab and rotate the sensor 1/4 turn counterclockwise to remove it. While you are doing this, check to see if the sensor's O-ring is in good condition. Check that the sensor O-ring is not damaged and take care to clean the sensor area in the intake manifold. As you rotate the sensor clockwise into the pipe, it should pass through the tab in the release spot once you reach that part.

OEM 2002 Dodge Ram 1500 Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2002 Dodge Ram 1500 Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2002 Dodge Ram 1500 Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Remove and Install the Intake Manifold Temperature Sensor on 2002 Dodge Ram 1500?
A: On the left side of the intake manifold plenum, you'll find the intake manifold temperature (IMT) sensor. Remove the electrical connection from the IMT sensor and then clean any debris from around the sensor site. After that, gently pull the small release tab and rotate the sensor 1/4 turn counterclockwise to remove it. While you are doing this, check to see if the sensor's O-ring is in good condition. Check that the sensor O-ring is not damaged and take care to clean the sensor area in the intake manifold. As you rotate the sensor clockwise into the pipe, it should pass through the tab in the release spot once you reach that part.