How to Locate, Remove, and Install the Intake Manifold Temperature Sensor on 2002 Jeep Wrangler?

The 4.0L and 2.5L engine have the Intake Manifold Temperature (IMT) sensor in the intake manifold plenum and is in the vicinity of the throttle body. To access the removal of the sensor, disconnect the electrical connector of the IMT sensor then remove the sensor located inside the intake manifold. To install, follow the above steps by placing the IMT sensor back in the intake manifold and tightening it to a torque of 28 Nm (20 ft. lbs.), and then connect back the respective electrical connector to the sensor.

OEM 2002 Jeep Wrangler Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2002 Jeep Wrangler Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Locate, Remove, and Install the Intake Manifold Temperature Sensor on 2002 Jeep Wrangler?
A: The 4.0L and 2.5L engine have the Intake Manifold Temperature (IMT) sensor in the intake manifold plenum and is in the vicinity of the throttle body. To access the removal of the sensor, disconnect the electrical connector of the IMT sensor then remove the sensor located inside the intake manifold. To install, follow the above steps by placing the IMT sensor back in the intake manifold and tightening it to a torque of 28 Nm (20 ft. lbs.), and then connect back the respective electrical connector to the sensor.