Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2003 Dodge Neon A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Compressor Cut-Out Switches found

  • 2003 Dodge Neon A/C Compressor Cut-Out Switches - 5014574AA
    2003 Dodge Neon A/C Compressor Cut-Out Switches Diagram - 5014574AA
    View related parts

    2003 Dodge Neon Pressure Switch Part Number: 5014574AA

    $66.93 MSRP: $94.50
    You Save: $27.57 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Safety & Compressor Cut-Out Switch; A/C Trinary Switch.; High Pressure Cut-Off Switch; Switch A/C High Pressure Cut Off
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 1.3 x 1.3 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5014574AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Dodge Neon Submodels:
    • ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
  • 2003 Dodge Neon A/C Compressor Cut-Out Switches - 5058213AA
    2003 Dodge Neon A/C Compressor Cut-Out Switches - 5058213AA
    2003 Dodge Neon A/C Compressor Cut-Out Switches - 5058213AA
    2003 Dodge Neon A/C Compressor Cut-Out Switches - 5058213AA
    2003 Dodge Neon A/C Compressor Cut-Out Switches - 5058213AA
    2003 Dodge Neon A/C Compressor Cut-Out Switches Diagram - 5058213AA
    View related parts

    2003 Dodge Neon Pressure Switch Part Number: 5058213AA

    Product Specifications
    • Other Name: Switch - A/C Low Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; Switch A/C Low Pressure Cut Off
    • Replaces: 5096290AA
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 3.1 x 2.5 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5058213AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Dodge Neon Submodels:
    • R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2003 Dodge Neon A/C Compressor Cut-Out Switches Parts and Q&A

  • Q: How Are A/C Compressor Cut-Out Switches Serviced and Repaired on 2003 Dodge Neon?
    A: Before dealing with the high pressure sensor/switch, drain all refrigerant and take out the battery negative cable. Lift the vehicle, then remove the wire connector from the high pressure cut out switch, found on the compressor's back cover. Remove the internal snap ring securing the high pressure cut out switch to the switch port in the compressor back cover using snap ring pliers and then pull the switch out. Insert a short plug or cover the switch port with tape and throw away the rubber seal that was seated in the high pressure cut out switch. When installing, first remove any dirt from the switch bore, fit a new O-ring (made from the special material for the R-134a system) and apply the recommended refrigerant oil from the compressor for your car. Take the tape or plug from the switch port, fit the high pressure cut out switch into the port and attach the engine wire harness connector to it. Lower your vehicle, connect the battery negative end, expel the refrigerant from the A/C system (referred to as evacuating) and recharge everything.

Related 2003 Dodge Neon Parts

Alternate Year Models

+
2002 Dodge Neon A/C Compressor Cut-Out Switches 2004 Dodge Neon A/C Compressor Cut-Out Switches