How to Service and Repair an Ignition Coil on 2003 Jeep Wrangler?

First, unplug the electrical connector at the rear of the ignition coil and then remove all secondary cables from the coil to service and repair it. After that, get rid of the four coil mounting bolts and take the coil out of the car. When installing, fix the coil to the engine and bolt it down following the given instructions for torque. You should now reattach the secondary cables with the electrical connector located at the end of the coil. Afterwards, place the air cleaner tube and housing.

OEM 2003 Jeep Wrangler Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2003 Jeep Wrangler Ignition Coil Part Number: 4609103AC
$141.61 MSRP: $212.00
You Save: $70.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil On Plug Coil; Coil
- Replaces: 4609103AB, 5269670, 4609103
- Item Weight: 2.50 Pounds
- Item Dimensions: 4.1 x 4.6 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4609103AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- SE | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2003 Jeep Wrangler Ignition Coil Part Number: 56041476AB
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56041476AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 5.3 x 6.2 x 29.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041476AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS

2003 Jeep Wrangler Ignition Coil Parts and Q&A

Q: How to Service and Repair an Ignition Coil on 2003 Jeep Wrangler?
A: First, unplug the electrical connector at the rear of the ignition coil and then remove all secondary cables from the coil to service and repair it. After that, get rid of the four coil mounting bolts and take the coil out of the car. When installing, fix the coil to the engine and bolt it down following the given instructions for torque. You should now reattach the secondary cables with the electrical connector located at the end of the coil. Afterwards, place the air cleaner tube and housing.