How to Service a Camshaft Position Sensor on a 3.7L V-6 Engine on 2004 Dodge Dakota?

First, take off the CMP sensor's electrical connector and then remove the mounting bolt before twisting the sensor off the cylinder head and checking its O-ring. For assembly, empty the machined hole in the cylinder head, then cover the sensor O-ring with a small drop of engine oil. Before tightening the mounting bolt, gently rock and twist the sensor into place so it rests completely flush to the cylinder head, to avoid harming the sensor mounting part. Afterward, install the mounting bolt according to the recommended tightening and connect the electrical connector to the sensor.

OEM 2004 Dodge Dakota Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2004 Dodge Dakota Camshaft Position Sensor Part Number: 56041584AF
$105.20 MSRP: $158.00
You Save: $52.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Camshaft
- Replaces: 56041584AE, 56028133AE, 56028133AD, 56041584AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041584AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 3.7L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Dakota Camshaft Position Sensor Parts and Q&A

Q: How to Service a Camshaft Position Sensor on a 3.7L V-6 Engine on 2004 Dodge Dakota?
A: First, take off the CMP sensor's electrical connector and then remove the mounting bolt before twisting the sensor off the cylinder head and checking its O-ring. For assembly, empty the machined hole in the cylinder head, then cover the sensor O-ring with a small drop of engine oil. Before tightening the mounting bolt, gently rock and twist the sensor into place so it rests completely flush to the cylinder head, to avoid harming the sensor mounting part. Afterward, install the mounting bolt according to the recommended tightening and connect the electrical connector to the sensor.