Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
2004 Jeep Liberty Windshield Washer Nozzle Parts and Q&A
Q: How to Service and Replace a Windshield Washer Nozzle Without Damaging It on 2004 Jeep Liberty?
A: Noting that the rear windshield washer spray nozzle latch becomes unreliable after removal, do not attempt to remove it from its mount; you will need to replace the entire nozzle. The trim stick or flat-bladed tool should be carefully placed to help the rear washer nozzle bottom separate from the roof till the snap feature is revealed. Move the nozzle out just enough to get to the washer hose and unhook it from its barbed nipple on the back, then throw away the old nozzle. When installing, put the rear washer nozzle up on the roof panel and place a new rubber gasket behind. Attach the washer hose to the barbed nipple, add the nozzle supply nipple and hose to the hole and place them in line. Place the top tab of the nozzle behind the metal and push down and hold evenly on the hood of the nozzle until the latch piece snaps into place at the bottom hole in the mount.