Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Chrysler Crossfire ABS Control Module

Anti Lock Brake Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

  • 2005 Chrysler Crossfire ABS Control Module - 5161126AB
    2005 Chrysler Crossfire ABS Control Module - 5161126AB
    2005 Chrysler Crossfire ABS Control Module Diagram - 5161126AB
    View related parts

    2005 Chrysler Crossfire Modulator Valve Part Number: 5161126AB

    Product Specifications
    • Other Name: Control - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
    • Item Weight: 7.50 Pounds
    • Item Dimensions: 12.2 x 7.9 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5161126AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
  • 2005 Chrysler Crossfire ABS Control Module - 5161125AB
    2005 Chrysler Crossfire ABS Control Module - 5161125AB
    2005 Chrysler Crossfire ABS Control Module Diagram - 5161125AB
    View related parts

    2005 Chrysler Crossfire Control Module Part Number: 5161125AB

    Product Specifications
    • Other Name: Control - Anti-Lock Brake; ABS Control Module; Control Unit Anti-Lock Brake
    • Replaces: 5135427AA, 5161125AA
    • Item Weight: 2.50 Pounds
    • Item Dimensions: 10.3 x 8.0 x 5.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5161125AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire ABS Control Module Parts and Q&A

  • Q: How to Service and Repair an ABS Control Module in the Hydraulic Control Assembly on 2005 Chrysler Crossfire?
    A: For the Hydraulic Control Unit (Hcu) in the antilock brakes, first clean the top of the Hcu around the 1-6 hydraulic lines, to prevent any debris from getting into the holes. Stick markers on the hydraulic brake lines and their links at the Hcu, so you can easily attach them when you replace the plugs. Remove the connector leading from the hydraulic controller unit to the Cab, then, gently push the hydraulic lines out of the way so you can lift out the Hcu. Check the rubber grommets as you install them to see if they are worn out. If they are, replace them. To install the lines correctly, use the markings to guide you and keep from driving screws into different threads. Place the brake lines as instructed, attach the hydraulic control unit harness connector to the Cab, drain the air from the brake system and then attach the Drbiii to handle troubleshooting.

Related 2005 Chrysler Crossfire Parts

Alternate Year Models

+
2004 Chrysler Crossfire ABS Control Module 2006 Chrysler Crossfire ABS Control Module