How to Service a Yaw Sensor on 2005 Chrysler Crossfire?

The process starts by pulling out the rear center console. After that, unplug the yaw rate/lateral acceleration sensor harness connector and remove the nuts holding it on (1). When installing, fit the yaw rate/lateral acceleration sensor (1) and tighten up the mounting bolts to 10 Nm (89 inch lbs.). After that, link up the yaw rate/lateral acceleration connector and reinstall the center console behind the middle seat.

OEM 2005 Chrysler Crossfire Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2005 Chrysler Crossfire Yaw Sensor Part Number: 5136176AA
Product Specifications
- Other Name: Sensor - Yaw Rate; Suspension Yaw Sensor; Sensor Yaw Rate
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.2 x 2.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5136176AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire Yaw Sensor Parts and Q&A

Q: How to Service a Yaw Sensor on 2005 Chrysler Crossfire?
A: The process starts by pulling out the rear center console. After that, unplug the yaw rate/lateral acceleration sensor harness connector and remove the nuts holding it on (1). When installing, fit the yaw rate/lateral acceleration sensor (1) and tighten up the mounting bolts to 10 Nm (89 inch lbs.). After that, link up the yaw rate/lateral acceleration connector and reinstall the center console behind the middle seat.