How to Maintain a Window Motor for Your Front Door on 2005 Chrysler Crossfire?

To access the motor to service the front door window, first remove the door trim panel (and the watershield) by first peeling back or removing all or a part of the watershield. Drill out the rivets, disconnect the motor and remove it. Install the new motor in the original holes, grease the gear and re-assemble everything before reconnecting the battery.

OEM 2005 Chrysler Crossfire Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Window Motors found

View related parts
2005 Chrysler Crossfire Window Motor, Front Driver Side Part Number: 5097931AA
Product Specifications
- Other Name: Motor - Window Regulator; Power Window Motor, Front Left; Motor Window Regulator
- Position: Front Driver Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.8 x 5.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097931AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Window Motor, Front Passenger Side Part Number: 5097930AA
Product Specifications
- Other Name: Motor - Window Regulator; Power Window Motor, Front Right; Motor Window Regulator
- Position: Front Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.0 x 5.9 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5097930AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire Window Motor Parts and Q&A

Q: How to Maintain a Window Motor for Your Front Door on 2005 Chrysler Crossfire?
A: To access the motor to service the front door window, first remove the door trim panel (and the watershield) by first peeling back or removing all or a part of the watershield. Drill out the rivets, disconnect the motor and remove it. Install the new motor in the original holes, grease the gear and re-assemble everything before reconnecting the battery.