How to Service a Yaw Sensor on 2006 Chrysler Crossfire?

Remove the rear center console, then pull open the yaw rate/lateral acceleration sensor harness connector. After that, take off the mounting nuts and remove the yaw rate/lateral acceleration sensor labeled as 1. Replace the yaw rate/lateral acceleration sensor (1) and tighten its nuts to 10 Nm (89 in. lbs.) for installation. Afterwards, plug in the yaw rate/lateral acceleration cable and bolt the center console back into position.

OEM 2006 Chrysler Crossfire Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2006 Chrysler Crossfire Yaw Sensor Part Number: 5136176AA
Product Specifications
- Other Name: Sensor - Yaw Rate; Suspension Yaw Sensor; Sensor Yaw Rate
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.2 x 2.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5136176AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Yaw Sensor Parts and Q&A

Q: How to Service a Yaw Sensor on 2006 Chrysler Crossfire?
A: Remove the rear center console, then pull open the yaw rate/lateral acceleration sensor harness connector. After that, take off the mounting nuts and remove the yaw rate/lateral acceleration sensor labeled as 1. Replace the yaw rate/lateral acceleration sensor (1) and tighten its nuts to 10 Nm (89 in. lbs.) for installation. Afterwards, plug in the yaw rate/lateral acceleration cable and bolt the center console back into position.