How to Safely Service and Replace a Blower Motor Resistor on 2005 Dodge Caravan?

Before servicing the blower motor resistor, turn off the air bag system by taking out the car's negative battery cable, waiting for two minutes and then isolate it. At least five minutes after turning off the blower should be enough for the resistor to cool since it heats up quite a bit during use. Don't turn on the blower motor unless the resistor is in place to avoid harming your vehicle. Make sure to remove the negative battery cable and then move the glove box off the instrument panel. After that, unplug the wire harnesses from the front blower motor resistor and remove the two screws holding it to the front HVAC case. Finally, pull out the resistor. At the installation stage, plug the new front blower motor resistor into the front HVAC housing and fix it using the two screws, tightened to 17 in. lbs. (2 N.m). Now, join the wire connectors to the resistor, fit the glove box back into place and lastly connect the battery cable to the negative battery terminal.

OEM 2005 Dodge Caravan Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2005 Dodge Caravan Resistor Part Number: 68029175AA
$25.20 MSRP: $37.25
You Save: $12.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; HVAC Blower Motor Regulator; Blower Motor Resistor
- Replaces: 4885583AB, 4885583AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68029175AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2005 Dodge Caravan Resistor Part Number: 5019189AA
$75.86 MSRP: $96.17
You Save: $20.31 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; Blower Motor Resistor; Resistor Blower Motor
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 4.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019189AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2005 Dodge Caravan Control Module, Front Part Number: 4885482AC
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control; Front Control Module; Blower Motor Resistor; Module; Resistor; Module Power Blower Motor
- Position: Front
- Replaces: 68003999AA, 68038199AA, RL885482AC, 4885482AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 3.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885482AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2005 Dodge Caravan Blower Motor Resistor Parts and Q&A

Q: How to Safely Service and Replace a Blower Motor Resistor on 2005 Dodge Caravan?
A: Before servicing the blower motor resistor, turn off the air bag system by taking out the car's negative battery cable, waiting for two minutes and then isolate it. At least five minutes after turning off the blower should be enough for the resistor to cool since it heats up quite a bit during use. Don't turn on the blower motor unless the resistor is in place to avoid harming your vehicle. Make sure to remove the negative battery cable and then move the glove box off the instrument panel. After that, unplug the wire harnesses from the front blower motor resistor and remove the two screws holding it to the front HVAC case. Finally, pull out the resistor. At the installation stage, plug the new front blower motor resistor into the front HVAC housing and fix it using the two screws, tightened to 17 in. lbs. (2 N.m). Now, join the wire connectors to the resistor, fit the glove box back into place and lastly connect the battery cable to the negative battery terminal.