How to Safely Service and Install a Headlight Switch on 2005 Dodge Dakota?

To avoid being hurt by the air bags, first turn off the supplemental restraint system before servicing the headlamp switch. Break the link between the battery's negative terminal and the car battery cable, then give the system two minutes to discharge. First, take off the bezel around the cluster, then disconnect the wire harness from the back of the headlamp switch. Remove the three screws attaching the headlamp switch to the bezel reverse, then take out the switch. Put the headlamp switch behind the cluster bezel as you install and tighten the three screws to 2 N.m (17 in. lbs.). Secure the wire harness connector to the back of the headlamp switch, install the cluster bezel over the instrument panel and finally attache the negative battery cable.

OEM 2005 Dodge Dakota Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Headlight Switches found

View related parts
2005 Dodge Dakota Headlamp Switch Part Number: 56049636AD
$63.08 MSRP: $89.15
You Save: $26.07 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp; Headlight Switch; Switch Headlamp
- Replaces: 56049636AC
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.3 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049636AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Dakota Headlamp Switch Part Number: 56049637AD
Product Specifications
- Other Name: Switch - Headlamp; Headlight Switch; Switch Headlamp
- Replaces: 56049637AC
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.2 x 4.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049637AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Dakota Headlamp Switch Part Number: 56049120AD
Product Specifications
- Other Name: Switch - Headlamp; Headlight Switch; Switch Headlamp
- Replaces: 56049120AC
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.2 x 5.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049120AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Dakota Turn Signal Switch Part Number: 56049823AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch; Air Bag Clockspring.; Multifunction Switch; Switch Housing; Ignition Housing; Clockspring; Switch Multifunction
- Replaces: 56045515AA, 56049823AA, 56045165AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.0 x 5.6 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049823AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 2.5L L4, 3.7L V6, 3.9L V6, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2005 Dodge Dakota Headlight Switch Parts and Q&A

Q: How to Safely Service and Install a Headlight Switch on 2005 Dodge Dakota?
A: To avoid being hurt by the air bags, first turn off the supplemental restraint system before servicing the headlamp switch. Break the link between the battery's negative terminal and the car battery cable, then give the system two minutes to discharge. First, take off the bezel around the cluster, then disconnect the wire harness from the back of the headlamp switch. Remove the three screws attaching the headlamp switch to the bezel reverse, then take out the switch. Put the headlamp switch behind the cluster bezel as you install and tighten the three screws to 2 N.m (17 in. lbs.). Secure the wire harness connector to the back of the headlamp switch, install the cluster bezel over the instrument panel and finally attache the negative battery cable.