How to Service and Repair a Neutral Safety Switch on 2005 Dodge Dakota?

To service the Transmission Position Switch/Sensor, remove the valve body assembly, remove the manual shaft seal and retaining screw to slide off the TRS. Reinstall the TRS, making sure there is proper alignment, set the torque to 5 Nm, change the manual shaft seal and reinstall the valve body.

OEM 2005 Dodge Dakota Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2005 Dodge Dakota Neutral Safety Switch Part Number: 56045489AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up; Switch Neutral Safety, Back Up
- Replaces: 56045489AB
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 3.0 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045489AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2005 Dodge Dakota Neutral Safety Switch Parts and Q&A

Q: How to Service and Repair a Neutral Safety Switch on 2005 Dodge Dakota?
A: To service the Transmission Position Switch/Sensor, remove the valve body assembly, remove the manual shaft seal and retaining screw to slide off the TRS. Reinstall the TRS, making sure there is proper alignment, set the torque to 5 Nm, change the manual shaft seal and reinstall the valve body.