Other Name: Adjuster - Power Seat; Front Right/Left Seat Adjusters; Front Left/Right Seat Tracks.; Seat Adjust Assembly; Track; Motor; Adjuster
Position: Driver Side
Replaces: 68020712AA, 4610223AA, 5191799AA
Item Weight: 20.30 Pounds
Item Dimensions: 9.3 x 19.9 x 21.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5138979AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
Adventurer, Limited, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2005 Dodge Durango Seat Motor Parts and Q&A
Q: How to Service and Repair a Seat Motor for Rear Tilt on 2005 Dodge Durango?
A: The first step in maintaining the rear tilt motor is to turn off the negative battery cable and isolate it. Remove the seat that includes the motor that doesn't work, along with the seat cushion and pan. Take the motor (3) electrical connector off and remove all the fasteners that keep the motor (3) to the seat adjuster (1). When that's done, lift out the motor (3) from the seat adjuster (1). During installation, place the motor (3) onto seat adjuster (2) and attach the fasteners (1) so the motor is fastened to the seat adjuster. Attach the electrical connector from the motor to the seat, add the seat cushion and fasten the wire harness to the cushion pan. Now, replace the seat assembly and connect the battery negative cable. Remember to check that the vehicle responds well to commands.