How to Remove and Install a Camshaft Position Sensor on 2005 Dodge Neon?

To remove the camshaft position sensor, disconnect the brake booster hose and electrical connector, disconnect the sensor's connectors and remove the screws on the sensor. Loosen the magnet screw that you intend to add and insert the magnet and tighten it to 3.4 Nm. Reinstall the sensor, tighten the screws of the sensor to 9 Nm and reconnect all.

OEM 2005 Dodge Neon Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2005 Dodge Neon Camshaft Position Sensor Part Number: 5096057AA
$60.57 MSRP: $132.00
You Save: $71.43 (55%)
ADD TO CART
Product Specifications
- Other Name: Sensor Packkage - Camshaft; Sensor Package Camshaft
- Replaces: 4882850AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5096057AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT, Sport | 4 Cyl 2.0 L GAS
View related parts
2005 Dodge Neon Camshaft Position Sensor Part Number: 5093508AA
Product Specifications
- Other Name: Sensor Packkage - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Package Camshaft
- Replaces: 4882851AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.5 x 2.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093508AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, High Line, R/T, SRT-4, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2005 Dodge Neon Camshaft Position Sensor Parts and Q&A

Q: How to Remove and Install a Camshaft Position Sensor on 2005 Dodge Neon?
A: To remove the camshaft position sensor, disconnect the brake booster hose and electrical connector, disconnect the sensor's connectors and remove the screws on the sensor. Loosen the magnet screw that you intend to add and insert the magnet and tighten it to 3.4 Nm. Reinstall the sensor, tighten the screws of the sensor to 9 Nm and reconnect all.