How to Service and Repair a Dimmer Switch on 2005 Dodge Neon?

Remove and separate the battery negative cable as the first step to serve and fix the combination switch. Take off the upper and lower shrouds around the steering column and then remove the two posi-lock harness connectors at the back of the multi-function switch. Take out the multi-function switch mounting screws and when you're putting in a new switch, move the combination flasher and wiper/washer control over to it. When installing, put the windshield wiper/washer switch onto the new multi-function switch and if there is a combination flasher, also transfer it. Use a torque wrench to attach the multi-function switch by screwing them in to 3 Nm (27 in. lbs.) tightness. Couple the pose-lock harness at the switch's back, fit each upper and lower shroud on the steering column to its original place and then attach the negative cable to the battery.

OEM 2005 Dodge Neon Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Dimmer Switches found

View related parts
2005 Dodge Neon Headlamp Switch Part Number: 5073045AC
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Combination Switch; Wiper Switch
- Replaces: 5073045AA, 4794306AB, 5019569AA, 5073045AB, 4794306AA, 4794306AC
- Item Weight: 1.50 Pounds
- Item Dimensions: 11.9 x 6.3 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073045AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Headlamp Switch Part Number: 5073046AC
Product Specifications
- Other Name: Switch - Multifunction
- Replaces: 5019570AA, 5073046AB, 5073046AA
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073046AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Headlamp Switch Part Number: 5073044AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Combination Switch; Wiper Switch; Switch Multifunction
- Replaces: 4794305AA, 4794305AC, 5019568AA, 5073044AA, 4794305AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.7 x 5.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073044AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2005 Dodge Neon Dimmer Switch Parts and Q&A

Q: How to Service and Repair a Dimmer Switch on 2005 Dodge Neon?
A: Remove and separate the battery negative cable as the first step to serve and fix the combination switch. Take off the upper and lower shrouds around the steering column and then remove the two posi-lock harness connectors at the back of the multi-function switch. Take out the multi-function switch mounting screws and when you're putting in a new switch, move the combination flasher and wiper/washer control over to it. When installing, put the windshield wiper/washer switch onto the new multi-function switch and if there is a combination flasher, also transfer it. Use a torque wrench to attach the multi-function switch by screwing them in to 3 Nm (27 in. lbs.) tightness. Couple the pose-lock harness at the switch's back, fit each upper and lower shroud on the steering column to its original place and then attach the negative cable to the battery.