How to Program the Engine Control Module with the SKIS Secret Key on 2005 Jeep Grand Cherokee?

Question

Accepted Answer

Turn the ignition switch to On while the transmission is in Park or Neutral, then program the Pcm with the Skis Secret Key from the Skreem, Pcm and ignition key transponder chip(s). First, select Theft Alarm on the scan tool, followed by Skreem, next Miscellaneous and last, Pcm Replaced (Gas Engine). Go to secured access mode and enter in the Pin of your vehicle followed by the Enter button to change the Pcm Vin. When three tries are all wrong, access mode will block for an hour; to resume operation, first set the ignition to the On position for an hour, make sure the vehicle is parked, battery charge is normal and a charger is attached if required. Press Enter to send the secret key from the Skreem onto the Pcm. From there, select the Select System option, Engine, Miscellaneous and Sri Memory Check. The scan tool will confirm if the odometer reading is in the appropriate range; answer by selecting either Yes or No. Should you choose No, please enter the current mileage shown by the instrument cluster and press Enter.

OEM 2005 Jeep Grand Cherokee Engine Control Module

3 Engine Control Modules found

2005 Jeep Grand Cherokee Control Module Part Number: R6044517AE

2005 Jeep Grand Cherokee Control Module Part Number: 56044516AE

2005 Jeep Grand Cherokee Control Module Part Number: R6044515AE

2005 Jeep Grand Cherokee Engine Control Module Parts and Q&A

Related 2005 Jeep Grand Cherokee Parts

Alternate Year Models