Other Name: Spring - Front Coil; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Front; Coil Spring Set; Coil Springs; Spring Front Coil; Coil Spring
Position: Front
Item Weight: 11.60 Pounds
Item Dimensions: 14.6 x 14.5 x 4.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52128880AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
Other Name: Spring - Front Coil; Coil Spring, Front; Coil Spring Set; Coil Springs; Spring Front Coil
Position: Front
Item Weight: 9.50 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 52128879AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
2005 Jeep Liberty Coil Springs Parts and Q&A
Q: How to Maintain and Fix Front Coil Springs on 2005 Jeep Liberty?
A: Before you start working on the front coil spring, lift and support your car and remove the tire and its wheel. Following that, take the shock out and attach the assembly to the W-7200 Spring compressor. Squeeze the spring, loosen the shock mount nut and then remove the shock from the spring compressor. Move over the Insulator, Spring, shock and mount depending on the kind of repair found. Add the shock to the spring and spring compressor so it is held in place and after transferring the parts, install the shock mounting nut and secure it at 41 Nm (30 ft. lbs.). Compressing the springs lower, get off them from the compressor and onto the car again. When you're done, reattach the tire and wheel assembly, remove the support and drive down the vehicle.