How to Service and Repair a Wheel Bearing on 2005 Jeep Liberty?

Support the vehicle, take off the wheel and tire, then take out the caliper adapter, checking that the disc brake caliper gets good support so the brake hose is not exposed to damage. Following this, take out the disc brake rotor, wheel speed sensor and wire bracket. If your vehicle uses four-wheel drive, remove the axle shaft nut and all three mounting bolts for the hub/bearing assembly before removing the hub/bearing. Place the hub/bearing assembly on the vehicle, then use three bolts to mount it and tighten them to 130 Nm (96 ft. lbs.). If the car uses four-wheel drive, fit the axle shaft nut and torque it down to 135 Nm (100 ft. lbs.). Clip the speed sensor wire to the bracket, put the wheel speed sensor onto the hub and tighten the bolt using 13.5 Nm (10 ft. lbs.). At this stage, reattach the disc brake rotor, screw the disc brake caliper adapter to the wheel with the nut tightened to 135 Nm (100 ft. lbs.) and connect the wheel and tire.

OEM 2005 Jeep Liberty Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2005 Jeep Liberty Wheel Bearing, Rear Part Number: 3507898AB
$57.95 MSRP: $87.55
You Save: $29.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Axle Shaft; Drive Axle Shaft Bearing, Rear; Differential Bearing; Axle Bearing; Axle Bearings; Bearing Assembly; Differential Cover Bearing; Bearing; Bearing Axle Shaft; Bearing Wheel
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.1 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3507898AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2005 Jeep Liberty Hub Assembly, Front Passenger Side Part Number: 52128692AF
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Right Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing
- Position: Front Passenger Side
- Replaces: 52128692AE, 52128692AA, 52128692AB, 52128692AD, 52128692AC
- Item Weight: 12.30 Pounds
- Item Dimensions: 8.4 x 8.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128692AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2005 Jeep Liberty Hub Assembly, Front Driver Side Part Number: 52128693AF
Product Specifications
- Other Name: Hub & Bearing - Brake; Front Left Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit.; Front Hub & Bearing
- Position: Front Driver Side
- Replaces: 52128693AD, 52128693AC, 52128693AB, 52128693AE, 52128693AA
- Item Weight: 12.90 Pounds
- Item Dimensions: 8.2 x 8.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128693AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2005 Jeep Liberty Wheel Bearing Parts and Q&A

Q: How to Service and Repair a Wheel Bearing on 2005 Jeep Liberty?
A: Support the vehicle, take off the wheel and tire, then take out the caliper adapter, checking that the disc brake caliper gets good support so the brake hose is not exposed to damage. Following this, take out the disc brake rotor, wheel speed sensor and wire bracket. If your vehicle uses four-wheel drive, remove the axle shaft nut and all three mounting bolts for the hub/bearing assembly before removing the hub/bearing. Place the hub/bearing assembly on the vehicle, then use three bolts to mount it and tighten them to 130 Nm (96 ft. lbs.). If the car uses four-wheel drive, fit the axle shaft nut and torque it down to 135 Nm (100 ft. lbs.). Clip the speed sensor wire to the bracket, put the wheel speed sensor onto the hub and tighten the bolt using 13.5 Nm (10 ft. lbs.). At this stage, reattach the disc brake rotor, screw the disc brake caliper adapter to the wheel with the nut tightened to 135 Nm (100 ft. lbs.) and connect the wheel and tire.