OEM 2006 Chrysler PT Cruiser Ignition Coil

2006 Chrysler PT Cruiser Ignition Coil Parts and Q&A

• Q: How to Remove and Install an Ignition Coil Identified by Part Number COIL-IGNITION on 2006 Chrysler PT Cruiser?

  A: Part number COIL-IGNITION or the electronic ignition coil pack, is directly fixed to the valve cover. To start, pull out the negative battery cable, then take the electrical connector off from the coil pack and remove the spark plug cables. After that, take the bolts out that hold the coil pack and remove the part. Next, put the new coil pack on the valve cover and screw the bolts until they reach 12 N.m (105 in. lbs.). Connect the spark plug cables to the coil pack by fitting them onto the numbered towers that go with the cylinders. In the last step, attach the negative battery cable to its port.