How to Maintain an Oxygen Sensor on 2006 Dodge Dakota?

In order to work on the oxygen sensor, you have to first raise the vehicle on proper furniture. When removing the 2/1 sensor from a 4-sensor system, it's necessary to take off the right-front tire/wheel and the plastic inner fender liner. Carefully unplug the connector from the O2S sensor so that you don't pull on the wire itself. Remove the O2S sensor with an O2S tool and afterward, use a proper tap to clean the threads in the exhaust pipe. Because the oxygen sensor's threads have anti-seize compound applied from the factory, do not add any more when installing. Secure the O2S sensor tightly to 30 N.m (22 ft. lbs.) torque and then link the O2S sensor wire connector. If adding a 2/1 sensor to a 4-sensor system, replace the inner plastic part covering the fender and right-front wheel after installing the sensor and do not lower the vehicle.

OEM 2006 Dodge Dakota Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oxygen Sensors found

View related parts
2006 Dodge Dakota Oxygen Sensor, Rear Part Number: 56028999AB
$197.65 MSRP: $294.00
You Save: $96.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.2 x 1.6 x 20.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028999AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Oxygen Sensor, Front Passenger Side Part Number: 56028995AB
$76.54 MSRP: $117.00
You Save: $40.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.3 x 8.1 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028995AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Laramie, SLT, ST | 6 Cyl 3.7 L GAS
View related parts
2006 Dodge Dakota Oxygen Sensor, Front Driver Side Part Number: 56028998AB
$94.67 MSRP: $141.00
You Save: $46.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Rear, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.3 x 5.6 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028998AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Oxygen Sensor, Front Passenger Side Part Number: 56028994AB
$79.61 MSRP: $119.00
You Save: $39.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right; Front Oxygen Sensor; Upper Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.9 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028994AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS
View related parts
2006 Dodge Dakota Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Dakota Oxygen Sensor Parts and Q&A

Q: How to Maintain an Oxygen Sensor on 2006 Dodge Dakota?
A: In order to work on the oxygen sensor, you have to first raise the vehicle on proper furniture. When removing the 2/1 sensor from a 4-sensor system, it's necessary to take off the right-front tire/wheel and the plastic inner fender liner. Carefully unplug the connector from the O2S sensor so that you don't pull on the wire itself. Remove the O2S sensor with an O2S tool and afterward, use a proper tap to clean the threads in the exhaust pipe. Because the oxygen sensor's threads have anti-seize compound applied from the factory, do not add any more when installing. Secure the O2S sensor tightly to 30 N.m (22 ft. lbs.) torque and then link the O2S sensor wire connector. If adding a 2/1 sensor to a 4-sensor system, replace the inner plastic part covering the fender and right-front wheel after installing the sensor and do not lower the vehicle.