How to Maintain and Repair a Wheel Hub on 2006 Dodge Dakota?

Raise the vehicle, place it on support stands and then start by taking out the wheel and tire, then the caliper and rotor. If the vehicle includes ABS, take the wheel speed sensor and halfshaft nut out for 4X4 models. Don't make contact between the knuckle and a hammer's head when you are separating the tie rod or ball joint. Lift up on the steering knuckle to unplug the halfshaft from the hub/bearing on 4X4 models and then remove the three bolts that hold the hub/bearing to the steering knuckle. Slide the bearing/hub away from the steering knuckle and get rid of the dust shield for the brakes. When you're installing, place the brake dust shield back first, install the hub/bearing into the steering knuckle and tighten the bolts to 163 Nm at 120 ft. lbs. Following this, put back the brake rotor and caliper and for ABS, the wheel speed sensor if it's involved. After placing the halfshaft nut onto 4X4 models, tighten it to a torque of 251 Nm (185 ft. lbs.) and then put the wheel and tire back on. Once you are done, remove the support and low the vehicle down.

OEM 2006 Dodge Dakota Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Hubs found

View related parts
2006 Dodge Dakota Hub Assembly, Front Part Number: 52104699AJ
$372.39 MSRP: $563.00
You Save: $190.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Brake; Wheel Bearing and Hub Assembly, Front; Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Wheel Hub; Hub
- Position: Front
- Replaced by: 52104699AK
- Item Weight: 7.70 Pounds
- Item Dimensions: 10.7 x 10.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104699AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Hub Assembly, Front Part Number: 52104698AE
$404.19 MSRP: $594.00
You Save: $189.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Brake; Front Wheel Bearing and Hub Assembly; Repair Kit; Assembly.; Hub; Hub And Bearing Brake Front; Wheel Bearing and Hub Assembly
- Position: Front
- Replaces: 52104698AD, 52104698AC, 52104698AA
- Item Weight: 15.60 Pounds
- Item Dimensions: 9.1 x 9.3 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104698AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Hub - Brake Part Number: 52104699AK
$372.39 MSRP: $563.00
You Save: $190.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BRAKE
- Replaces: 52104699AF, 52104699AI, 52104699AB, 52104699AJ, 52104699AG, 52104699AA, 52104699AD
- Item Weight: 15.50 Pounds
- Item Dimensions: 10.5 x 10.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104699AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Dakota Wheel Hub Parts and Q&A

Q: How to Maintain and Repair a Wheel Hub on 2006 Dodge Dakota?
A: Raise the vehicle, place it on support stands and then start by taking out the wheel and tire, then the caliper and rotor. If the vehicle includes ABS, take the wheel speed sensor and halfshaft nut out for 4X4 models. Don't make contact between the knuckle and a hammer's head when you are separating the tie rod or ball joint. Lift up on the steering knuckle to unplug the halfshaft from the hub/bearing on 4X4 models and then remove the three bolts that hold the hub/bearing to the steering knuckle. Slide the bearing/hub away from the steering knuckle and get rid of the dust shield for the brakes. When you're installing, place the brake dust shield back first, install the hub/bearing into the steering knuckle and tighten the bolts to 163 Nm at 120 ft. lbs. Following this, put back the brake rotor and caliper and for ABS, the wheel speed sensor if it's involved. After placing the halfshaft nut onto 4X4 models, tighten it to a torque of 251 Nm (185 ft. lbs.) and then put the wheel and tire back on. Once you are done, remove the support and low the vehicle down.