How to service an Oil Pressure Switch on 2006 Jeep Commander?

Before servicing the oil pressure sender, take out the negative cable from the battery and lift the car onto a hoist with a jack. Get rid of the front splash shield and cut loose the wire from the oil pressure sender (4). Afterward, take out the oil pressure sender (2). Install the oil pressure sender and link the wire from it as the first task during installation. Now, attach the new front splash shield, park it so that the wheels touch the floor and finish by connecting the negative battery cable.

OEM 2006 Jeep Commander Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2006 Jeep Commander Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- Limited, Overland, Sport | 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS

2006 Jeep Commander Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2006 Jeep Commander?
A: Before servicing the oil pressure sender, take out the negative cable from the battery and lift the car onto a hoist with a jack. Get rid of the front splash shield and cut loose the wire from the oil pressure sender (4). Afterward, take out the oil pressure sender (2). Install the oil pressure sender and link the wire from it as the first task during installation. Now, attach the new front splash shield, park it so that the wheels touch the floor and finish by connecting the negative battery cable.