How to Maintain an Oxygen Sensor on 2006 Jeep Grand Cherokee?

You should raise and support the vehicle before servicing the oxygen sensor. Untie the wire connector attached to the O2S sensor so the wireless connection will break. Remove the oxygen sensor with the special tool and make sure to clean the threads inside the pipe using the needed tap. During installation of a new oxygen sensor, ensure you don't apply another coat of anti-seize as it comes out of the factory coated. Place the O2S sensor and ensure its torque is set to 30 N.m (22 ft. lbs.), then connect the wire connector from the O2S sensor before you lower the vehicle. First, let the engine cool off before you unplug the oxygen sensor and don't grease the connector or attempt any soldering on the sensor wiring harness.

OEM 2006 Jeep Grand Cherokee Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oxygen Sensors found

View related parts
2006 Jeep Grand Cherokee Oxygen Sensor, Front Passenger Side Part Number: 56028994AB
$79.61 MSRP: $119.00
You Save: $39.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right; Front Oxygen Sensor; Upper Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.9 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028994AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Oxygen Sensor, Front Passenger Side Part Number: 56028994AA
$151.61 MSRP: $225.00
You Save: $73.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.6 x 7.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028994AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8, Special Edition | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Jeep Grand Cherokee Oxygen Sensor, Front Driver Side Part Number: 56028998AB
$94.67 MSRP: $141.00
You Save: $46.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Rear, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.3 x 5.6 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028998AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Jeep Grand Cherokee Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Jeep Grand Cherokee Oxygen Sensor Parts and Q&A

Q: How to Maintain an Oxygen Sensor on 2006 Jeep Grand Cherokee?
A: You should raise and support the vehicle before servicing the oxygen sensor. Untie the wire connector attached to the O2S sensor so the wireless connection will break. Remove the oxygen sensor with the special tool and make sure to clean the threads inside the pipe using the needed tap. During installation of a new oxygen sensor, ensure you don't apply another coat of anti-seize as it comes out of the factory coated. Place the O2S sensor and ensure its torque is set to 30 N.m (22 ft. lbs.), then connect the wire connector from the O2S sensor before you lower the vehicle. First, let the engine cool off before you unplug the oxygen sensor and don't grease the connector or attempt any soldering on the sensor wiring harness.