How to Service the Oil Pressure Switch on 2006 Jeep Liberty?

Facing the battery, take out the negative cable first, then hoist up the car. With the front shield gone, cut the wire (4) activating the oil pressure sender and pulling out the sender. Having prepared the oil pressure sender, start with putting it in place and then connect its wire. Afterward, set the front splash shield back on, lower the vehicle to the ground and lastly attach the negative battery cable again.

OEM 2006 Jeep Liberty Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2006 Jeep Liberty Oil Pressure Sending Unit Part Number: 5149064AB
$63.23 MSRP: $85.70
You Save: $22.47 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Sensor; Engine Oil Pressure Switch; Oil Pressure Switch; Sending Unit Oil Pressure
- Replaces: 5149064AA, 5093908AA, 56028807AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 1.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149064AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 2.4L L4, 2.8L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2006 Jeep Liberty Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS

2006 Jeep Liberty Oil Pressure Switch Parts and Q&A

Q: How to Service the Oil Pressure Switch on 2006 Jeep Liberty?
A: Facing the battery, take out the negative cable first, then hoist up the car. With the front shield gone, cut the wire (4) activating the oil pressure sender and pulling out the sender. Having prepared the oil pressure sender, start with putting it in place and then connect its wire. Afterward, set the front splash shield back on, lower the vehicle to the ground and lastly attach the negative battery cable again.