How to Replace a Wiper Switch for the Rear Windshield on 2006 Jeep Wrangler?

First, cut off the negative battery cable and wait for two minutes to deactivate the supplemental restraint system, if it's available on your vehicle before moving on with the replacement. Start the process by getting rid of the accessory switch bezel from the dashboard. Use a trim stick or a wide flat tool to lift the tabs holding the rear wiper and washer on the back accessory switch bezel and then pull the switch out of its place. Put the new rear wiper and washer switch in the correct spot and press it in gently until all of the snap features are secure by the latch tabs. After that, connect the ground lead to the battery, then install the accessory switch bezel on the dashboard.

OEM 2006 Jeep Wrangler Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Switches found

View related parts
2006 Jeep Wrangler Rear Wiper Switch Part Number: 56007249
Product Specifications
- Other Name: Switch - Windshield Wiper; Back Glass Wiper Switch; Windshield Washer Switch; Front Wiper Switch; Switch; Switch Windshield Wiper
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 2.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56007249
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Wiper Switch Part Number: 5016711AB
Product Specifications
- Other Name: Switch - Intermittent Wiper; Windshield Washer Switch; Front Wiper Switch; Switch Intermittent Wiper Right Stalk Includes Windshield Washer & Wiper Functions
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.6 x 5.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5016711AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Wiper Switch Parts and Q&A

Q: How to Replace a Wiper Switch for the Rear Windshield on 2006 Jeep Wrangler?
A: First, cut off the negative battery cable and wait for two minutes to deactivate the supplemental restraint system, if it's available on your vehicle before moving on with the replacement. Start the process by getting rid of the accessory switch bezel from the dashboard. Use a trim stick or a wide flat tool to lift the tabs holding the rear wiper and washer on the back accessory switch bezel and then pull the switch out of its place. Put the new rear wiper and washer switch in the correct spot and press it in gently until all of the snap features are secure by the latch tabs. After that, connect the ground lead to the battery, then install the accessory switch bezel on the dashboard.