How to Properly Remove and Service a Crankshaft Seal on 2007 Chrysler Aspen?

If the seal change is done on the car, first take off the transmission and then the flexplate. The crankshaft oil seal cannot be reused after being taken out of the engine. Install Special Tool 8506 very deep into the seal and hold onto the tool, pulling it tight as needed until it can't be turned any further. If installation fails, there is a chance that the tool will come loose before the seal is removed from the engine. Use Special Tool 8506 at the end to remove the crankshaft rear oil seal.

OEM 2007 Chrysler Aspen Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2007 Chrysler Aspen Oil Seal, Front Part Number: 53021313AA
$10.10 MSRP: $14.85
You Save: $4.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Chrysler Aspen Oil Seal, Front Part Number: 53021585AD
$24.52 MSRP: $36.25
You Save: $11.73 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Front Engine Crankshaft Seal; Timing Cover Seal; Gasket; Crankshaft Seal; Front Seal included with Long Block Engine Install Kit.
- Position: Front
- Replaces: 53021585AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021585AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2007 Chrysler Aspen Rear Main Seal Part Number: 53020788AB
$32.91 MSRP: $48.75
You Save: $15.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Chrysler Aspen Rear Main Seal Part Number: 53021335AE
$94.83 MSRP: $142.00
You Save: $47.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal, Rear; Rear Main Seal Retainer; Crankshaft Rear Oil Seal not included with Long Block Engine Install Kit.
- Position: Rear
- Replaces: 53021335AD, 53021338AB, 68017721AA, 53021335BA, 53021335AC, 68060342AA, 5140028AA
- Item Weight: 3.10 Pounds
- Item Dimensions: 1.3 x 10.2 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021335AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2007 Chrysler Aspen Crankshaft Seal Parts and Q&A

Q: How to Properly Remove and Service a Crankshaft Seal on 2007 Chrysler Aspen?
A: If the seal change is done on the car, first take off the transmission and then the flexplate. The crankshaft oil seal cannot be reused after being taken out of the engine. Install Special Tool 8506 very deep into the seal and hold onto the tool, pulling it tight as needed until it can't be turned any further. If installation fails, there is a chance that the tool will come loose before the seal is removed from the engine. Use Special Tool 8506 at the end to remove the crankshaft rear oil seal.