Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Chrysler Crossfire Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

  • 2007 Chrysler Crossfire Air Bag Sensor - 68005690AA
    2007 Chrysler Crossfire Air Bag Sensor Diagram - 68005690AA
    View related parts

    2007 Chrysler Crossfire Side Impact Sensor Part Number: 68005690AA

    Product Specifications
    • Other Name: Sensor - Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Sensor Air Bag
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 3.8 x 1.3 x 1.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68005690AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Crossfire Submodels:
    • Base, Limited | 6 Cyl 3.2 L GAS
  • 2007 Chrysler Crossfire Air Bag Sensor - 5099300AA
    2007 Chrysler Crossfire Air Bag Sensor Diagram - 5099300AA
    View related parts

    2007 Chrysler Crossfire Side Impact Sensor Part Number: 5099300AA

    Product Specifications
    • Other Name: Sensor - Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor; Sensor Air Bag
    • Item Weight: 1.10 Pounds
    • Item Dimensions: 0.3 x 0.3 x 0.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5099300AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Chrysler Crossfire Submodels:
    • Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Air Bag Sensor Parts and Q&A

  • Q: How to Safely Install and Service an Air Bag Sensor on 2007 Chrysler Crossfire?
    A: Before you begin servicing, first cut off the battery negative cable, let the system capacitor discharge for two minutes and then reconnect the negative cable to disable the supplemental restraint system and protect yourself. Be sure that the negative battery cable is unplugged. Install the front impact sensor in the proper mounting location using the supplied two mounting screws and tightened them to 7 Nm (62 in. lbs.). Join the front impact sensor electrical connector and close the access panel in the inner fender well just before lowering the vehicle. Don't plug in the negative battery cable until you have completed the verification test for the additional restraints system. You should also run the Supplemental Restraint System (Srs) - Verification Test.

Related 2007 Chrysler Crossfire Parts

Alternate Year Models

+
2006 Chrysler Crossfire Air Bag Sensor 2008 Chrysler Crossfire Air Bag Sensor