Other Name: Seat Belt - Rear Center Shoulder; Seat Belt Lap and Shoulder Belt, Rear Center; Center Seat Belt; Seat Belt Rear Counter Shoulder; Seat Belt Rear Center Shoulder
Position: Rear Center
Replaces: 5KJ72XDHAB, 5KJ721DVAB, 5KJ721DVAA
Item Weight: 2.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 5KJ721DVAC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
R/T, SLT, SXT | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
2007 Dodge Nitro Seat Belt Parts and Q&A
Q: How to Maintain the Second Row Outboard Seat Belt on 2007 Dodge Nitro?
A: Prior to servicing the outboard seat belt, inspect every seat belt, buckle, holder, retractor, strap and anchor and adjust or replace any fasteners you notice are loose, belts that are torn or frayed and oddly shaped or uneven buckles, retractors, latches or anchors. If an anchor for a child seat appears bent or damaged, have it replaced and never repair a seat belt or child restraint yourself; always find new and unused replacement parts in the DaimlerChrysler Mopar(R) Parts Catalog. Access the lower anchor by reaching down through the open area outside the second row seat back and unscrewing the nut that holds that anchor to the rear floor panel. Take the seat belt lower anchor out of the stud and unhook the trim and screw from the seat belt turning loop attached to the upper C-pillar. Then, eliminate the quarter trim around the inner lower C-pillar and the screw that holds the retractor bracket in place there. After that, remove the second row outboard seat belt and retractor as a single unit from the C-pillar.