Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Dodge Ram 1500 Harmonic Balancer

Engine Harmonic Balancer
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

  • 2007 Dodge Ram 1500 Harmonic Balancer - 53020689AB
    2007 Dodge Ram 1500 Harmonic Balancer - 53020689AB
    2007 Dodge Ram 1500 Harmonic Balancer - 53020689AB
    2007 Dodge Ram 1500 Harmonic Balancer Diagram - 53020689AB
    View related parts

    2007 Dodge Ram 1500 Vibration Damper Part Number: 53020689AB

    Product Specifications
    • Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
    • Item Weight: 10.90 Pounds
    • Item Dimensions: 10.5 x 10.4 x 6.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53020689AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Ram 1500 Submodels:
    • Laramie, SLT, ST, SXT, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2007 Dodge Ram 1500 Harmonic Balancer - 53021303AD
    2007 Dodge Ram 1500 Harmonic Balancer Diagram - 53021303AD
    View related parts

    2007 Dodge Ram 1500 Vibration Damper Part Number: 53021303AD

    Product Specifications
    • Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
    • Replaces: 53021303BA
    • Item Weight: 8.30 Pounds
    • Item Dimensions: 11.6 x 10.5 x 6.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53021303AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Ram 1500 Submodels:
    • Laramie, SLT, ST, Sport, TRX4 | 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Dodge Ram 1500 Harmonic Balancer Parts and Q&A

  • Q: How to install a Harmonic Balancer on 2007 Dodge Ram 1500?
    A: You should always clean the harmonic balancer bore and crankshaft nose well before installing the harmonic balancer. Fit the key on the crankshaft into the slot of the crankshaft harmonic balancer and put the harmonic balancer over the crankshaft partway. Crack Special Tool 8512-A by screwing nut 2 onto threaded rod 3 first, adding roller bearing 1 with the hardened surface toward the nut and sliding hardened washer 5 onto the shaft. Cover the threads on the threaded rod with Mopar (R) Nickel Anti-Seize or a similar product. Place Special Tool 8512-A on the crankshaft, press the harmonic balancer toward it and then apply 175 Nm (130 ft. lbs.) of force to tighten the bolt. Then, place the cooling fan assembly and the radiator upper shroud in position, using an 11 Nm (95 in. lbs.) tightening bar on the bolts. Connect the shroud fan plug, put in the upper radiator hose and install the accessory drive belt. Fill the cooling system again and link the negative cable to the battery.

Related 2007 Dodge Ram 1500 Parts

Alternate Year Models

+
2006 Dodge Ram 1500 Harmonic Balancer 2008 Dodge Ram 1500 Harmonic Balancer