Other Name: Seat Belt - Buckle Half; Seat Belt Receptacle, Front Center, Rear Left; Rear Belt Assembly Buckle; Latch; Seat Belt Buckle Half Center Buckle; Seat Belt Buckle Half Center Seat
Position: Front Center
Replaces: 5GW281D5AA
Item Weight: 1.00 Pounds
Item Dimensions: 12.2 x 3.1 x 1.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5GW281D5AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Ram 3500 Submodels:
Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Rear Right; Rear Belt Assembly Buckle; Latch; Front Inner Center Shoulder Belt Buckle; Front Center Seat.
Position: Inner Passenger Side
Replaces: 5HG321D5AD, 5HG321J3AD
Item Weight: 1.20 Pounds
Item Dimensions: 9.4 x 3.4 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5HG321X9AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Ram 3500 Submodels:
Laramie, SLT, ST, SXT, Sport | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS
| Page 1 of 2 |Next >
1-20 of 33 Results
2007 Dodge Ram 3500 Seat Belt Parts and Q&A
Q: How Can Seat Belt and Child Restraint Anchor Services Be Made Safer on 2007 Dodge Ram 3500?
A: Always inspect all parts, including seat belts, buckles and their hardware, retractors, tether straps and anchors during seat belt or child restraint service to check for safe installation, proper function or damage and replace any cut or worn belts, straighten twisted ones, tighten loose fasteners and exchange any worn or torn buckles, retractors, latch or anchor plates. Should the anchor area of a seat belt or child restraint system be bent or damaged, it must be replaced and you must also replace any damaged adjustment cables in the same area. Never attempt to repair any area of a seat belt or child restraint device; always order replacements from the DaimlerChrysler Mopar(R) Parts Catalog. A black, keyed, fixed position, lower anchor buckle for the center seat belt is on the right side of the front center seat for standard cab vehicles, a three-point belt fastened with a buckle in front center seats is on the left side in fixed position for front center seats in quad and mega cabs and the buckle for the center seat's lap belt is also in the front, located on the right side of the driver's section in the fixed center position for front center seats. During installation, pass the front center seat belt buckle, lap belt or anchor buckle's loop through the stretchy strap on one edge of the center seat cushion. Pull the anchor down between the side of the center seat cushion and the nearest front outboard seat cushion so the belt webbing does not become twisted. Use the lower anchor and function the anti-rotation tab into the center seat support through the fitting hole. Then, use and tighten the screw to secure the lower anchor to the bracket until it reaches 40 Nm (29 ft. lbs.). On standard cab trucks, fit the stowage tray back into the curve of the floor panel directly behind the seat.