How to Service a Blower Motor Resistor on 2007 Dodge Sprinter 2500?

Before handling the blower motor resistor, cut its connection with the battery and wait around two minutes for the capacitor to drain, so you do not damage the air bag system. Allow the heat sink to cool for five minutes after turning off the blower motor, because it runs hot as it works. Always keep the resistor attached to the blower motor for vehicle safety. Unplug the negative battery-terminal first, then take out the glove box from the instrument panel. Then, remove the wire harness from the blower motor resistor and finally, spin the blower motor resistor counterclockwise to free it from the HVAC housing.

OEM 2007 Dodge Sprinter 2500 Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2007 Dodge Sprinter 2500 Resistor Part Number: 68012613AA
$106.46 MSRP: $163.00
You Save: $56.54 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.7 x 3.8 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68012613AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2007 Dodge Sprinter 2500 Blower Motor Resistor Parts and Q&A

Q: How to Service a Blower Motor Resistor on 2007 Dodge Sprinter 2500?
A: Before handling the blower motor resistor, cut its connection with the battery and wait around two minutes for the capacitor to drain, so you do not damage the air bag system. Allow the heat sink to cool for five minutes after turning off the blower motor, because it runs hot as it works. Always keep the resistor attached to the blower motor for vehicle safety. Unplug the negative battery-terminal first, then take out the glove box from the instrument panel. Then, remove the wire harness from the blower motor resistor and finally, spin the blower motor resistor counterclockwise to free it from the HVAC housing.