How to Install and Secure the Rear Blower Motor and Evaporator Housing on 2007 Dodge Sprinter 2500?

Put the rear blower motor beside the rear evaporator housing and fasten it with the retaining screws, making sure the tightness is no greater than 5 Nm (44 in. lbs.). Connect each of the wire harness connectors (5) to the blower motor. Tighten the EV insulator (2) that connects at the top of the vehicle with retaining screws (1) to 2 Nm (17 in. lbs.). Insert the four retaining bolts (3) into the rear condenser bracket (5) first, put on the rear condenser cover bracket (2), then secure the bolts with a wrench. Make sure the rear A/C suction line (1) is secure to its rear condenser bracket by using the nut and bolt (4). Cover the rear condenser with its attached cover and secure it with 2 Nm (17 in. lbs.) torque on each retaining screw, then attach the negative battery cable back to the vehicle.

OEM 2007 Dodge Sprinter 2500 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motors found

View related parts
2007 Dodge Sprinter 2500 Blower Motor Part Number: 68012680AA
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; Suction Fan, Cabin Air; Motor Blower With Wheel; HVAC Blower Motor
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.7 x 8.7 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68012680AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 2500 Blower Motor, Rear Part Number: 5103806AA
Product Specifications
- Other Name: Motor; HVAC Blower Motor Assembly, Rear; HVAC Blower Motor, Rear; Blower Spirit; Blower; HVAC Blower Motor
- Position: Rear
- Item Weight: 2.70 Pounds
- Item Dimensions: 8.5 x 9.5 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103806AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 2500 Blower Motor, Rear Part Number: 68012631AA
Product Specifications
- Other Name: Blower With Wheel; HVAC Blower Motor Assembly, Rear; Motor Blower With Wheel
- Position: Rear
- Item Weight: 4.70 Pounds
- Item Dimensions: 15.8 x 10.2 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68012631AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 2500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2007 Dodge Sprinter 2500 Blower Motor Parts and Q&A

Q: How to Install and Secure the Rear Blower Motor and Evaporator Housing on 2007 Dodge Sprinter 2500?
A: Put the rear blower motor beside the rear evaporator housing and fasten it with the retaining screws, making sure the tightness is no greater than 5 Nm (44 in. lbs.). Connect each of the wire harness connectors (5) to the blower motor. Tighten the EV insulator (2) that connects at the top of the vehicle with retaining screws (1) to 2 Nm (17 in. lbs.). Insert the four retaining bolts (3) into the rear condenser bracket (5) first, put on the rear condenser cover bracket (2), then secure the bolts with a wrench. Make sure the rear A/C suction line (1) is secure to its rear condenser bracket by using the nut and bolt (4). Cover the rear condenser with its attached cover and secure it with 2 Nm (17 in. lbs.) torque on each retaining screw, then attach the negative battery cable back to the vehicle.