How to Service and Repair a Rear Parking Brake Cable for Rear on 2007 Jeep Commander?

For rear end service and repair, begin by fitting the cable to the vehicle and holding it with the 2 push pins onto the stabilizer bar bracket. After that, connect the stabilizer bar bushing clamp bolts and guide the park brake cable into the support plate. Done, now fasten the cable from the brake lever to the rear park brakes and set the shoes back correctly. After that, it's time to install the disc brake rotor and the rear caliper and to thread the park brake cables through the floor. Wheels and tires put in place, set the vehicle down and bring the brake cables back to the equalizer. Free the park brake cable and fold away the rear carpet before fitting the rear sill plates and mounting the nuts for the (FDCM) module bracket. Join the (FDCM) module and then replace the rear seat bottom, ending with a check of the parking brake.

OEM 2007 Jeep Commander Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2007 Jeep Commander Front Cable Part Number: 5134701AB
$43.71 MSRP: $64.75
You Save: $21.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Item Weight: 1.40 Pounds
- Item Dimensions: 33.0 x 0.7 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5134701AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Rear Cable Part Number: 68024891AB
$45.09 MSRP: $61.35
You Save: $16.26 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Package - Parking Brake; Brake Cable; Cable Package Parking Brake; Cable Parking Brake
- Replaces: 52124333AA, 68024891AA
- Item Weight: 1.90 Pounds
- Item Dimensions: 62.4 x 11.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68024891AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Rear Cable Part Number: 68024890AC
$35.89 MSRP: $53.45
You Save: $17.56 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable Package - Parking Brake; Brake Cable
- Replaces: 68024890AB, 68024890AA, 52124334AA
- Item Weight: 1.80 Pounds
- Item Dimensions: 48.8 x 10.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68024890AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Parking Brake Cable Parts and Q&A

Q: How to Service and Repair a Rear Parking Brake Cable for Rear on 2007 Jeep Commander?
A: For rear end service and repair, begin by fitting the cable to the vehicle and holding it with the 2 push pins onto the stabilizer bar bracket. After that, connect the stabilizer bar bushing clamp bolts and guide the park brake cable into the support plate. Done, now fasten the cable from the brake lever to the rear park brakes and set the shoes back correctly. After that, it's time to install the disc brake rotor and the rear caliper and to thread the park brake cables through the floor. Wheels and tires put in place, set the vehicle down and bring the brake cables back to the equalizer. Free the park brake cable and fold away the rear carpet before fitting the rear sill plates and mounting the nuts for the (FDCM) module bracket. Join the (FDCM) module and then replace the rear seat bottom, ending with a check of the parking brake.