How to Replace a Brake Master Cylinder on 2007 Jeep Liberty?

Before changing the Brake Master Cylinder, make sure you bleed it if you have recently replaced it. First, wipe the cylinder mounting part of the brake booster with a rag. Now, fix the master cylinder onto the brake booster studs and attach it using the mounting nuts, ensuring the force is 25 Nm (220 in. lbs.). After that, join the brake lines to the master cylinder and tighten them to 20 Nm (180 in. lbs.). Next, plug in the fluid level electrical connector to its place on the reservoir. You should also bleed and run fluid through the main part of the braking system.

OEM 2007 Jeep Liberty Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2007 Jeep Liberty Master Cylinder Part Number: 5189227AA
$842.92 MSRP: $1068.55
You Save: $225.63 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.60 Pounds
- Item Dimensions: 13.2 x 11.1 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189227AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Sport | 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2007 Jeep Liberty Brake Master Cylinder Parts and Q&A

Q: How to Replace a Brake Master Cylinder on 2007 Jeep Liberty?
A: Before changing the Brake Master Cylinder, make sure you bleed it if you have recently replaced it. First, wipe the cylinder mounting part of the brake booster with a rag. Now, fix the master cylinder onto the brake booster studs and attach it using the mounting nuts, ensuring the force is 25 Nm (220 in. lbs.). After that, join the brake lines to the master cylinder and tighten them to 20 Nm (180 in. lbs.). Next, plug in the fluid level electrical connector to its place on the reservoir. You should also bleed and run fluid through the main part of the braking system.