How to Properly Install a Brake Master Cylinder on 2007 Jeep Wrangler?

If you are replacing the master cylinder, ensure you bleed it before actually installing the new one. Wipe the top of the cylinder where it joins the brake booster. Be certain to ensure an O-ring sits at the interface where the master and booster cylinders meet. Attach the master cylinder to the brake booster studs and screw in the mounting nuts until they reach 17 Nm (151 in. lbs.). Link the brake lines to the master cylinder and tighten them until you reach 19 Nm (168 in. lbs.). Next, put the fluid level connector on the reservoir and bleed the whole base brake system.

OEM 2007 Jeep Wrangler Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2007 Jeep Wrangler Master Cylinder Part Number: 68057474AE
$368.69 MSRP: $537.00
You Save: $168.31 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Assembly; Master Cylinder Brake
- Replaces: 68057474AA, 68057474AD, 68057474AC, 68057474AB, 68003617AB, 68003617AA
- Item Weight: 9.50 Pounds
- Item Dimensions: 10.2 x 10.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68057474AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2007 Jeep Wrangler Brake Master Cylinder Parts and Q&A

Q: How to Properly Install a Brake Master Cylinder on 2007 Jeep Wrangler?
A: If you are replacing the master cylinder, ensure you bleed it before actually installing the new one. Wipe the top of the cylinder where it joins the brake booster. Be certain to ensure an O-ring sits at the interface where the master and booster cylinders meet. Attach the master cylinder to the brake booster studs and screw in the mounting nuts until they reach 17 Nm (151 in. lbs.). Link the brake lines to the master cylinder and tighten them until you reach 19 Nm (168 in. lbs.). Next, put the fluid level connector on the reservoir and bleed the whole base brake system.