How to Remove and Replace a Brake Master Cylinder on 2008 Jeep Wrangler?

Before replacing the Brake Master Cylinder, empty and drain out the brake fluid from the reservoir. At this point, unplug the wires from the fluid level electrical connector that forks with the main body 3 from inside the reservoir 2. After that, get rid of the brake lines 4 that lead from the master cylinder. Afterward, remove the mounting nuts 5 from the master cylinder and take it out from the vehicle. Pull off the cylinder cover and remove the rest of the coolant from the system. Should the master cylinder reservoir need service, refer to the Fluid Reservoir/Removal procedure found elsewhere.

OEM 2008 Jeep Wrangler Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2008 Jeep Wrangler Master Cylinder Part Number: 68057474AE
$368.69 MSRP: $537.00
You Save: $168.31 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Assembly; Master Cylinder Brake
- Replaces: 68057474AA, 68057474AD, 68057474AC, 68057474AB, 68003617AB, 68003617AA
- Item Weight: 9.50 Pounds
- Item Dimensions: 10.2 x 10.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68057474AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS

2008 Jeep Wrangler Brake Master Cylinder Parts and Q&A

Q: How to Remove and Replace a Brake Master Cylinder on 2008 Jeep Wrangler?
A: Before replacing the Brake Master Cylinder, empty and drain out the brake fluid from the reservoir. At this point, unplug the wires from the fluid level electrical connector that forks with the main body 3 from inside the reservoir 2. After that, get rid of the brake lines 4 that lead from the master cylinder. Afterward, remove the mounting nuts 5 from the master cylinder and take it out from the vehicle. Pull off the cylinder cover and remove the rest of the coolant from the system. Should the master cylinder reservoir need service, refer to the Fluid Reservoir/Removal procedure found elsewhere.