How to Install an Occupant Detection Sensor on 2007 Jeep Wrangler?

The occupant detecting sensor may be installed by switching off the supplemental restraint system by removing the negative battery cable. Attach the sensor to the 28 Nm level at two nuts, by means of a strain gauge alignment tool. Rebuild the harness of the seat wire, reassemble the seat and do verification tests by using a diagnostic scan tool.

OEM 2007 Jeep Wrangler Occupant Detection Sensor

OPDS Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Occupant Detection Sensor found

View related parts
2007 Jeep Wrangler Position Sensor Part Number: 68605049AA
$26.73 MSRP: $39.25
You Save: $12.52 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Seat Position; Occupant Sensor; Passenger Discriminating Sensor; Occupant Module; Sensor
- Replaces: 68035045AA, 5084008AA, 68313550AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68605049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X | 2.0L L4, 3.0L V6, 3.6L V6, 3.8L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 8 Cyl 6.4 L GAS

2007 Jeep Wrangler Occupant Detection Sensor Parts and Q&A

Q: How to Install an Occupant Detection Sensor on 2007 Jeep Wrangler?
A: The occupant detecting sensor may be installed by switching off the supplemental restraint system by removing the negative battery cable. Attach the sensor to the 28 Nm level at two nuts, by means of a strain gauge alignment tool. Rebuild the harness of the seat wire, reassemble the seat and do verification tests by using a diagnostic scan tool.