OEM 2008 Chrysler Pacifica Parking Brake Shoe

2008 Chrysler Pacifica Parking Brake Shoe Parts and Q&A

• Q: How to Remove the Parking Brake Shoe from Each Side on 2008 Chrysler Pacifica?

  A: First push the manual lock on the adjuster button in the parking brake lever when removing the parking brake shoes for both sides. After that, raise and support the vehicle. Get rear hub and bearing and then remove them. After that, take out the parking brake cable bolt at the knuckle and let the parking brake shoe adjustment move completely backward. Take off the parking brake shoe adjuster spring (3) along with the shoe adjuster (8). Take off the clip and pin at the top of the brake shoe and then take off the clip and pin at the bottom (7). Take out the upper and lower shoes (6) and the return spring (4) from the shoe actuator. Once done, remove the return spring (4) from the shoes (6).