Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
Other Name: Control - Auto Temperature Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
Replaces: 55111876AB, 55111876AC, 55111876AA
Item Weight: 1.40 Pounds
Item Dimensions: 10.5 x 4.8 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55111876AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Jeep Grand Cherokee Submodels:
Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
2008 Jeep Grand Cherokee A/C Switch Parts and Q&A
Q: How to Safely Operate the A/C Switch for Heater Control on 2008 Jeep Grand Cherokee?
A: To do this, make sure you remove and separate the negative battery cable to disconnect the air bag system and wait two minutes before touching the A/C heater control. This is needed so that air bags do not go off accidentally and injure or kill someone. It should be noted that ATC A/C-heater controls are not interchangeable; therefore, use just the control made for the subject vehicle. First, remove the negative battery cable from its connection. Then, remove the center bezel from the instrument panel and set it down on a workbench. When that is done, unscrew the electronic vehicle information center control and A/C-heater control from the center bezel and take out both of them.