How to Install a Blower Motor and Reconnect the Negative Battery Cable on 2008 Jeep Grand Cherokee?

After placing the blower motor into the HVAC housing, screw it down using the three screws and tighten them to ensure they have approximately 2.2 Nm (20 in. lbs.) of torque. Connect the wire harness connector either to the blower motor power module or resistor, in accordance with the device. After that, place the glove box in the instrument panel. If the usage allows, fit the instrument panel silencer to the area near the driver on the passenger side. Lastly, attach the negative battery cable back.

OEM 2008 Jeep Grand Cherokee Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2008 Jeep Grand Cherokee Blower Motor, Front Part Number: 5143099AB
$251.00 MSRP: $336.00
You Save: $85.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; HVAC Blower Motor, Front; HVAC Blower Motor; Blower Assembly
- Position: Front
- Replaces: 5143099AA, 68020234AB, 68020234AA
- Item Weight: 4.50 Pounds
- Item Dimensions: 9.7 x 9.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143099AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Jeep Grand Cherokee Blower Motor Parts and Q&A

Q: How to Install a Blower Motor and Reconnect the Negative Battery Cable on 2008 Jeep Grand Cherokee?
A: After placing the blower motor into the HVAC housing, screw it down using the three screws and tighten them to ensure they have approximately 2.2 Nm (20 in. lbs.) of torque. Connect the wire harness connector either to the blower motor power module or resistor, in accordance with the device. After that, place the glove box in the instrument panel. If the usage allows, fit the instrument panel silencer to the area near the driver on the passenger side. Lastly, attach the negative battery cable back.