How to Install a Blower Motor and Reconnect the Negative Battery Cable on 2007 Jeep Grand Cherokee?

Place the blower motor in the HVAC housing, then use the three screws to hold it in place while tightening to 2.2 Nm (20 in. lbs.). Join one end of the wire harness to the power module or resistor on the blower motor, as it should be for your equipment. After that, put the glove box into place and, if your car has a silencer, insert it into the area below the right half of the instrument panel. After that, join the negative terminal back onto the battery.

OEM 2007 Jeep Grand Cherokee Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2007 Jeep Grand Cherokee Blower Motor, Front Part Number: 5143099AB
$251.00 MSRP: $336.00
You Save: $85.00 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; HVAC Blower Motor, Front; HVAC Blower Motor; Blower Assembly
- Position: Front
- Replaces: 5143099AA, 68020234AB, 68020234AA
- Item Weight: 4.50 Pounds
- Item Dimensions: 9.7 x 9.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143099AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2007 Jeep Grand Cherokee Blower Motor Parts and Q&A

Q: How to Install a Blower Motor and Reconnect the Negative Battery Cable on 2007 Jeep Grand Cherokee?
A: Place the blower motor in the HVAC housing, then use the three screws to hold it in place while tightening to 2.2 Nm (20 in. lbs.). Join one end of the wire harness to the power module or resistor on the blower motor, as it should be for your equipment. After that, put the glove box into place and, if your car has a silencer, insert it into the area below the right half of the instrument panel. After that, join the negative terminal back onto the battery.