How to Safely Detach the Driver Air Bag on 2008 Jeep Liberty?

To take out the driver air bag, make sure the SRS is paused by removing and isolating the negative battery cable, then wait two minutes for the system capacitor to discharge. Put on rubber gloves, goggles and a shirt that covers your whole arm to protect yourself from any lint on the air bag cushion. Pull the steering column all the way down for convenience. Spin the steering wheel clockwise so that the air bag retainer access at two, six and ten o'clock ends up below the rim at twelve o'clock, one at a time. Place a short handled, flat-bladed screwdriver through the snap retainer wire loop on each armature hook; then, gently draw the driver air bag away so that the retainers do not snap back. After removing every snap retainer, pull the air bag out enough to get to the cable at the back of the air bag housing. Pull the lock straight out from each Clock Spring driver air bag pigtail wire connector and then remove the insulators found in the air bag inflator connector receptacles. Remove the driver air bag from the steering wheel at the end. A Clock Spring needs to be replaced if the driver's air bag has been triggered.

OEM 2008 Jeep Liberty Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bags found

View related parts
2008 Jeep Liberty Inflator Curtain, Driver Side Part Number: 52029411AG
$684.71 MSRP: $997.00
You Save: $312.29 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Left; Head Air Bag; Air Bag Side Curtain
- Position: Driver Side
- Replaces: 52029411AE, 52029411AC, 52029411AF, 52029411AD, 52029411AB
- Item Weight: 6.60 Pounds
- Item Dimensions: 44.0 x 9.9 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52029411AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Passenger Air Bag, Upper Passenger Side Part Number: 5057795AA
$966.38 MSRP: $1410.00
You Save: $443.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Passenger
- Position: Upper Passenger Side
- Replaces: 5108039AB, 5108039AC, 52029339AD, 5108039AA
- Item Weight: 7.40 Pounds
- Item Dimensions: 15.2 x 10.6 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5057795AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Side Impact Inflator Module, Beige, Passenger Side Part Number: 1CD57DK7AF
Product Specifications
- Other Name: Door - Passenger Air Bag; Air Bag Door; Door Passenger Air Bag
- Position: Passenger Side
- Replaces: 1CD57DK7AD, 1CD57DK7AE
- Item Weight: 2.20 Pounds
- Item Dimensions: 22.1 x 11.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1CD57DK7AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Driver Inflator Module, Beige, Driver Side Part Number: 1GK69DK7AF
Product Specifications
- Other Name: Airbag - Driver; Steering Wheel Air Bag; Driver Air Bag; Air Bag Driver
- Position: Driver Side
- Replaces: 5KG08DK7AE, 1GK69DK7AD, 1GK69DK7AE, 1GK69DK7AC
- Item Weight: 4.00 Pounds
- Item Dimensions: 12.1 x 10.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GK69DK7AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Driver Air Bag, Gray, Driver Side Part Number: 1GK69XDHAF
Product Specifications
- Other Name: Airbag - Driver; Steering Wheel Air Bag
- Position: Driver Side
- Replaces: 5KG08XDHAE, 1GK69XDHAC, 1GK69XDHAE, 1GK69XDHAD
- Item Weight: 4.10 Pounds
- Item Dimensions: 11.6 x 10.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GK69XDHAF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Inflator Curtain, Passenger Side Part Number: 52029410AG
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Right; Head Air Bag; Air Bag Side Curtain
- Position: Passenger Side
- Replaces: 52029410AF, 52029410AC, 52029410AB, 52029410AE, 52029410AD
- Item Weight: 6.80 Pounds
- Item Dimensions: 43.5 x 10.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52029410AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Jeep Liberty Air Bag Parts and Q&A

Q: How to Safely Detach the Driver Air Bag on 2008 Jeep Liberty?
A: To take out the driver air bag, make sure the SRS is paused by removing and isolating the negative battery cable, then wait two minutes for the system capacitor to discharge. Put on rubber gloves, goggles and a shirt that covers your whole arm to protect yourself from any lint on the air bag cushion. Pull the steering column all the way down for convenience. Spin the steering wheel clockwise so that the air bag retainer access at two, six and ten o'clock ends up below the rim at twelve o'clock, one at a time. Place a short handled, flat-bladed screwdriver through the snap retainer wire loop on each armature hook; then, gently draw the driver air bag away so that the retainers do not snap back. After removing every snap retainer, pull the air bag out enough to get to the cable at the back of the air bag housing. Pull the lock straight out from each Clock Spring driver air bag pigtail wire connector and then remove the insulators found in the air bag inflator connector receptacles. Remove the driver air bag from the steering wheel at the end. A Clock Spring needs to be replaced if the driver's air bag has been triggered.