Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Jeep Liberty Air Bag Sensor

Air Bag Impact Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

  • 2008 Jeep Liberty Air Bag Sensor - 4896061AB
    2008 Jeep Liberty Air Bag Sensor - 4896061AB
    2008 Jeep Liberty Air Bag Sensor - 4896061AB
    2008 Jeep Liberty Air Bag Sensor Diagram - 4896061AB
    View related parts

    2008 Jeep Liberty Air Bag Sensor, Front Part Number: 4896061AB

    $75.57 MSRP: $112.00
    You Save: $36.43 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
    • Position: Front
    • Replaces: 4672311AA, 52851601AB, 4896061AA
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 1.2 x 1.4 x 2.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896061AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Jeep Liberty Submodels:
    • Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
  • 2008 Jeep Liberty Air Bag Sensor - 4896065AB
    2008 Jeep Liberty Air Bag Sensor Diagram - 4896065AB
    View related parts

    2008 Jeep Liberty Impact Sensor, Outer Part Number: 4896065AB

    $194.09 MSRP: $274.00
    You Save: $79.91 (30%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
    • Position: Outer
    • Replaces: 4896065AA
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 2.5 x 1.2 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4896065AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Jeep Liberty Submodels:
    • Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Jeep Liberty Air Bag Sensor Parts and Q&A

  • Q: How to Service the Air Bag Sensor on the Inner C-Pillar on 2008 Jeep Liberty?
    A: To work on the side impact sensor, first turn off the SRS by disconnecting and isolating the negative battery cable, then wait about two minutes for the system capacitor to discharge. Side impact sensors should never be dropped, because a drop can damage them; if this happens, a new sensor must be used. Attach the body wire harness connector to the side impact sensor connector and place the impact sensor over the weld stud on the inner C-pillar so that the sensor's anti-rotation pin goes into the clearance hole. Bolster the sensor by fitting it to the weld stud with an elliptical nut, putting it at a torque of 7 Nm (62 in. lbs.). When the sensor is safe, tighten the trim back onto the lower C-pillar inside the vehicle. If you serve any SRS component, do not attach the negative cable of the battery until the verification test after service is finished.

Related 2008 Jeep Liberty Parts

Alternate Year Models

+
2007 Jeep Liberty Air Bag Sensor 2009 Jeep Liberty Air Bag Sensor